From CIIF 2026 to Bolivia: XARP Proposes Dual-Station Robotic Welding Solutions for School Furniture
Following the China International Industry Fair (CIIF) 2026, XARP continued technical discussions with a prospective customer from Bolivia who first connected with the company during the exhibition.
The customer provided school furniture drawings and a reference photograph of a chair featuring a metal frame and wooden components. Based on the manufacturing requirements, XARP prepared and submitted two robotic welding workstation proposals: one for school desk frames and another for chair leg assemblies.
Both proposed solutions use the XARP XP1440-10W welding robot, but adopt different positioner and fixture configurations to accommodate the respective workpieces.
Customer Workpieces and Manufacturing Requirements
The project concerns metal-frame school desks and chairs with wooden seating or tabletop components.
The supplied drawings identify a desk measuring 1200 × 600 × 800 mm and a chair with an overall height of approximately 650 mm.
For the proposed welding operations, the main engineering considerations include positioning the metal frame components, maintaining joint consistency, securing the assemblies in dedicated fixtures, and providing suitable access to the weld joints.
The customer's drawings and reference photographs served as the basis for XARP's workstation planning.


Proposed Solution 1: Robotic Welding for School Desk Frames
For the desk frame application, XARP proposed a dual-station MIG/MAG robotic welding workstation.
The proposed configuration includes:
- One XARP XP1440-10W six-axis welding robot
- Two single-axis headstock-and-tailstock positioners
- One AOTAI NBC-350RL welding power source
- Customized desk frame welding fixtures
- An air-cooled robotic welding torch and wire feeding system
- A torch cleaning station and safety protection system
The headstock-and-tailstock positioners are intended to rotate the desk frames into suitable welding orientations, helping the welding robot access joints at different positions.
The fixtures are designed around the agreed frame dimensions and may incorporate adjustable or interchangeable locating elements.

Proposed Solution 2: Robotic Welding for Chair Leg Assemblies
For the chair frame application, XARP developed a separate workstation proposal using the same XP1440-10W robot model.
Unlike the desk frame workstation, the chair welding solution uses two single-axis horizontal rotary positioners.
Each proposed positioner features a 1000 mm diameter rotary platform, allowing the chair leg assemblies to be rotated for welding access.
Customized fixtures are included to locate and secure the chair frame components during welding.
The proposed welding system also includes an AOTAI NBC-350RL power source, an air-cooled welding torch, a wire feeder, a torch cleaning station, and safety protection equipment.

How the Dual-Station Welding Process Is Designed
Both proposals follow an alternating two-station workflow:
- The operator loads and secures the components at the first station before requesting the welding cycle.
- While the robot performs automatic welding at the first station, the operator prepares the next assembly at the second station.
- After completing the first welding operation, the robot moves to the second station.
- The operator can then unload the welded assembly and prepare the next workpiece at the first station.
This arrangement is intended to coordinate manual loading and unloading with robotic welding operations.
Actual cycle times and production performance will depend on the final workpiece configuration, welding program, fixture design, and subsequent validation.
Engineering Considerations Before Implementation
The proposals identify several conditions that require attention before robotic welding can be implemented.
The metal components must be properly prepared, with welding areas free from contaminants and defects that could affect joint quality.
For preassembled and tack-welded components, the proposed joint consistency requirement is within 1 mm.
The final fixture configuration, welding parameters, safety arrangement, and acceptance requirements must be confirmed as the project progresses.
The technical proposals also describe planned equipment testing, welding trials, commissioning, and operator training as subsequent project activities rather than completed work.
Current Project Status
XARP has completed and submitted both technical proposals to the prospective customer in Bolivia.
The project is currently at the proposal evaluation and follow-up communication stage.
No completed installation, customer acceptance, or verified production performance is being reported at this stage.
The project illustrates how an international exhibition connection can develop into detailed, application-specific robotic welding planning.
Discuss Your Furniture Frame Welding Application with XARP
Manufacturers of school furniture, metal chairs, desks, and tubular steel structures may have different requirements for welding access, workpiece positioning, fixtures, and production workflows.
XARP can discuss robotic welding workstation configurations based on customer drawings, workpiece dimensions, materials, and manufacturing requirements.
Contact XARP to explore a suitable robotic welding proposal for your metal furniture manufacturing project.
0 comments