Teaching-Free Robotic Welding for Corrugated Steel Panels with XARP XP2010-10W
Preparing a robot to weld corrugated steel panels to a steel frame involves more than moving between two points. The welding path must follow the joints on the actual assembly, and preparing those movements can be demanding for operators with limited robot programming experience.
In a customer demonstration in China, a welding software partner used an XARP XP2010-10W welding robot with its teaching-free software to demonstrate a workflow combining drawing import, camera scanning, automatic path generation and robotic execution. The demonstration included a dry run, while photographs also document arc-on welding.
From CAD Drawings to Robot Welding Paths
The software partner purchased the XARP robot and integrated it with its own teaching-free welding software. The application involved joining corrugated steel panels to a structural steel frame, with the workpiece supported on two compact stands for the demonstration.
The demonstrated preparation sequence was:
- Import the drawing into the system: The software supports CAD/3D model import for welding path preparation.
- Perform an initial camera scan for calibration: This establishes alignment between the imported model and the workpiece setup.
- Scan again to confirm the weld seams: The system checks the joint locations before robot execution.
- Run the robot through the prepared path: The XP2010-10W performs a dry run to demonstrate the planned movements before welding.
This workflow brings digital drawings and the physical workpiece together during preparation, reducing the need to teach the robot's path point by point.

Making Welding Automation Easier to Learn
For manufacturers considering robotic welding, programming can be an important barrier to adoption. Operators may understand their components and welding requirements while having little experience with robot teaching.
The teaching-free workflow is designed to reduce dependence on manual robot programming. Drawing import and camera-assisted preparation provide a more accessible starting point for operators learning to use an automated welding system.
Application setup, welding parameters and operating procedures still require appropriate technical preparation and training. The benefit is a simpler approach to path preparation, rather than a requirement for every operator to become an experienced robot programmer.
XARP Robot Hardware with Partner Software Integration
The project combines two distinct contributions: XARP supplies the XP2010-10W robot, while the software partner provides the teaching-free software and application integration.
The partner's software also supports reverse modeling, offering another route for preparing digital workpiece information. For this demonstration, the described workflow began with drawing import, followed by camera scanning and path verification.
The application provides a practical example of how XARP XP2010-10W 6-axis robot hardware and specialist welding software can work together for structural steel fabrication.

Corrugated Panel Welding: Demonstration and Trial
Corrugated steel panel welding requires attention to joint access, workpiece positioning and the relationship between the panel and its supporting frame.
The dry-run demonstration shows the robot following the prepared trajectory. Separate arc-on photographs document welding activity during the customer trial. These materials illustrate the workflow and application setup; production cycle times and quantified welding performance have not been reported.
For manufacturers working with corrugated panels and steel frames, the demonstration offers a reference for evaluating how CAD-based programming and camera scanning could fit their own welding preparation process using an industrial welding robot.

Discuss Your Robotic Welding Application
XARP works with software partners, automation companies and system integrators on robot-based welding applications.
If you are developing a teaching-free welding solution or evaluating automation for steel-frame assemblies, share your workpiece drawings, joint locations and production requirements with our team.
Download XARP Robot Catalog (PDF)
Request a Quote for Your Welding Application
Frequently Asked Questions
What was welded in this application?
The customer trial involved corrugated steel panels joined to a structural steel frame using an XARP XP2010-10W robot.
How were the robot paths prepared?
The workflow used drawing import, an initial camera scan for calibration, a second scan to confirm weld seams, and a robot dry run to demonstrate the prepared path.
Does XARP supply the teaching-free software in this project?
The teaching-free software and application integration were provided by the software partner. XARP supplied the robot.
Is this workflow suitable for operators new to robot programming?
It reduces the need for point-by-point teaching and is intended to make path preparation easier for operators with limited robot programming experience. Training and application setup remain necessary.
0 comments