Robotic Welding for Galvanized Tube Frames: XP2010-10W in Production

Operator programming customized blue XARP XP2010-10W welding robot for galvanized tube frame production

For manufacturers producing galvanized square tube products in volume, welding cycle time and consistent weld appearance both matter. When production runs across multiple shifts, the welding process also needs to support a demanding daily schedule.

In this on-site application, a XARP XP2010-10W welding robot is used for welding galvanized tube frames. The robot has a customized blue finish and is paired with a 500A gas-shielded welding machine.

XARP XP2010-10W blue robotic welding arm welding galvanized square tube frame on fixture table

Welding Large Frames at About 170 Seconds per Workpiece

The workpiece shown is a large galvanized tube frame. The welding cycle is approximately 170 seconds per workpiece. The customer schedules multiple shifts for all-day production, making cycle time an important consideration in robotic welding systems.

The robot’s recorded travel speed of 1.5 m/s refers to air movement, not welding speed. It is therefore not used as the welding speed for this application.

Smooth Welds Without Grinding or Cleaning

The finished welds have a smooth appearance and do not require grinding or cleaning after welding. This can help reduce post-welding finishing work for this specific application.

Actual weld appearance and cycle time depend on the workpiece design, weld path, fixtures, and process settings. The result shown here is specific to this galvanized tube frame application.

Smooth weld seam on galvanized square tube corner joint welded by XARP XP2010-10W without grinding

Applications for Galvanized Tube Products

Galvanized square tubes are used in a variety of products, including truss structures, clothes racks, and exhibition tents. Manufacturers producing similar tube frames can evaluate whether an industrial welding robot is suitable for their workpieces, production volume, and shift schedule.

Customer Training and Robot Adjustment

In the on-site demonstrations, the customer demonstrated programming a weld seam and adjusting the XP2010-10W robot after approximately 30 minutes of training. The footage illustrates the automated welding process and the resulting weld consistency.

Application Video

Discuss Your Tube Welding Application with XARP

If you manufacture galvanized square tube frames or similar products and are considering welding automation, contact XARP to discuss your workpieces, production requirements, and potential cycle time.

📄 Download Robot Catalog (PDF)

Request a Quote for Your Welding Application

0 comments

Leave a comment