Project Overview
A customer selected seven matched sets of XARP EtherCAT servo drives and 100W servo motors for a seven-axis oscillating knife cutting machine.
The machine uses servo-controlled movements for cutting-head travel, rotation and lifting, including X, Y and Z positioning. Its applications include processing leather and expanded polyethylene foam, with typical material thicknesses of 3–5 mm in the reported application.
The customer tested the application before placing the order. According to the customer’s feedback, stable performance during sample testing, confidence in the XARP brand and perceived value for money contributed to the purchasing decision. Delivery of all seven sets has been completed.
Servo Configuration: Seven Matched Sets for One Machine
| Item | Confirmed configuration |
|---|---|
| Machine | Seven-axis oscillating knife cutting machine |
| Servo drives | XDQ1-01EAX |
| Communication | EtherCAT |
| Servo motors | XMQ1-H40A01B30E26 |
| Quantity | Seven matched motor-and-drive sets |
| Motor rated power | 100 W |
| Motor rated voltage | 220 V |
| Motor rated speed | 3,000 rpm |
| Motor flange size | 40 mm |
| Brake | Holding brake |
| Feedback | 23-bit absolute optical encoder |
XARP supplied the servo motors and servo drives. The customer purchased the complete cutting machine separately.
Motion Control for Cutting-Head Travel, Rotation and Lifting
The seven servo sets serve the machine’s seven axes. Their motion functions include positioning the cutting head, changing its direction and controlling vertical movement.
The servo system controls motor position, speed and torque according to the selected control mode and commands from the machine controller. In the cutting application, these functions support execution of the programmed motion paths.
The complete cutting result also depends on the machine structure, transmission, blade selection, material holding and operating settings. Motor feedback resolution should therefore be distinguished from finished-part cutting accuracy.


Leather and Foam Cutting Applications
The customer’s equipment supports irregular contours, curved paths and multilayer cutting tasks. Reported applications include leather and expanded polyethylene foam, commonly referred to as EPE foam.
Typical material thicknesses in this application are 3–5 mm. Material suitability and the number of layers must be assessed for the particular material, blade and machine setup.
The equipment can be used for sample preparation and production batches of different sizes. Customer-provided photographs show actual cutting samples from the machine using XARP servo components.


Testing Before Purchase
The project followed a test-first purchasing process:
- The customer evaluated the servo components in the cutting application.
- Sample testing demonstrated stable operation, as reported by the customer.
- The customer ordered seven matched motor-and-drive sets.
- XARP completed delivery.
This sequence provides a practical example of evaluating servo components against an actual machine application before committing to the order.


What to Provide When Selecting a Cutting Machine Servo System
For a similar application, provide the function of each axis, moving load, transmission mechanism and required motion profile.
Controller compatibility, power supply, installation space and brake requirements should also be reviewed. Material samples and cutting requirements help define the conditions under which the proposed configuration should be tested.
Frequently Asked Questions
Which servo products were used in this cutting machine?
The machine uses seven XDQ1-01EAX EtherCAT servo drives paired with seven XMQ1-H40A01B30E26 servo motors. Each motor is rated at 100 W, 220 V and 3,000 rpm, with a 40 mm flange, holding brake and 23-bit absolute optical encoder.
What movements are controlled by the servo system?
The servo sets serve the machine’s seven axes, including cutting-head travel, rotation and lifting. Position, speed and torque are controlled according to the selected operating mode and machine commands.
Was the configuration tested before purchase?
Yes. The customer conducted sample testing before ordering the seven sets. The customer reported stable operation, and delivery has been completed.
Discuss Your Cutting Machine Application
Share your axis requirements, controller information and cutting application with XARP to discuss suitable servo motors and drives.
0 comments